get a message when this question is answered. You should be left with three feet of spit wire and seven feet of intact wire. Upload error Awesome picture! If your equipment has cable-type connectors, use a standard cable splitter and buy adaptors to convert your twin-lead wire to coaxial. Slide the copper tubing onto the coaxial cable's stripped end, then slide it down to the 7, solder the coaxial cable's shielding to the tubing. If you drill a hole, weatherproof it with caulking.
Terk Technology AM/FM Radio Antenna
Adjust the direction of your antenna to find a compromise, if needed, between TV and FM radio reception. Divide the resulting number by 2 (e.g.,.3/2 would become.15). If your antenna is placed outside, you should implement some form of lightning protection. You can do this by removing the PVC (black) shielding from around an inch of the coaxial cable directly below the unshielded part, peeling it back with a pair of pliers to form a lip, and then using your soldering pen to connect the lip. How to Set Up a Flat Panel TV Without Cable. While you'll want to leave one end of the coaxial cable intact in order for it to serve as the connector, the other end will need to be removed. Question What part of the antenna do I use to attract the wavelength frequency? Your phone most likely already has FM radio as a feature. Question Would half inch copper tubing be okay to use? Look at the back of your radio and find the external antenna connection. Calculate the length of your antenna. GPS Antenna Testing, how to Connect an IR Remote Extender to Direct.
Fm tuner antenna hookup
Average cost of rv hookup, Easy hookup, Surround sound hookup to hdtv, Spokane gay hookup,